FCP-400 Floor Finish Stripper is a powerful stripper that is strong enough to remove hardened floor waxes and built-up layers of water resistant floor finishes.
Limitations
Never flood a Fritztile floor during stripping. Do not pour FCP-400 Floor Finish Stripper directly onto the tile surface. Do not use FCP-400 as a general purpose floor cleaner.
Surface Preparation
Move furniture/equipment as necessary. Sweep the floor with a broom or dust mop.
Mixing & Application
Use 1 part FCP-400 stripper to 20 parts clean water (6 oz. stripper per gallon of water). Apply with a mop or floor machine. For the fastest removal of wax or finish, use a floor machine and an abrasive pad. If areas under desks and along walls, or where heavy traffic is common have multiple coats of finish, use a solution of 1 part stripper to 3 parts water. Avoid splashing on painted base boards or walls. If this happens spotting may occur. Pick up soiled scrubbing solution with a mop or wet pickup vacuum. Rinse the floor thoroughly before applying floor finish.
Strong concentrations on unwaxed floors may cause discoloration.
Shelf Life
One year
Documentation
 |
FCP-400 Material Safety Data Sheet (MSDS), 200.21 kB |
|
FCP-400 Product Information Sheet, 98.35 kB |
Stock Information
| Product # | Product | Container Size | Unit US | Coverage Per Gallon |
| 369-98217 | FCP-400, floor stripper / finish remover | 1 gal. | 40 lbs. | 1000 - 3000 |
 |
|
|
|
|
Some documents require Adobe Reader If you've not yet installed Adobe Reader on your computer, click here to download and install it.
