
FRITZ F-10 is a Pozzolanic cement-based, high strength, fast setting, non-shrinking self-leveling underlayment. This product mixes smoothly with 1 gallon of water and can be poured from a barrel or pumped from a mixer. Additionally, F-10 can be mixed with ½ gallon of P100-Admixture added to the 1-gallon water for higher early strengths and flexural properties. FRITZ F-10 is manufactured with recycled materials.
Benefits
- Installs from featheredge to 1-1/2 inches.
- Fast-track system.
- Install floor covering in just 16 hours, second lifts in just 3-4 hours.
- No troweling required.
- Contains no Portland or Gypsum.
- Unaffected by water
Product Capabilities
FRITZ F-10 is for use over properly prepared concrete, metal, terrazzo, ceramic tile, wood (prepared as described), on above or below grade. When at final cure, F-10 is unaffected by water encroachment. Unlike other self leveling products, F-10 self levels without additional water to a 1/8-inch depth allowing 48 square feet of coverage per 50-pound bag.Pourable and pumpable. Installs from a featheredge to 1-1/2" in one operation. Designed specifically for fast leveling of floors, FRITZ F-10 provides a durable, flat and smooth floor surface with minimum labor and installation time.FRITZ F-10 hardens quickly by hydration and drying. It will not shrink, crack or spall, even when applied in thick layers. Floor coverings can be installed just 16 hours later.
Documentation
| F-10 Material Safety Data Sheet (MSDS), 693.77 kB | |
| F-10 Product Information Sheet, 75.24 kB |
Some documents require Adobe Reader If you've not yet installed Adobe Reader on your computer, click here to download and install it.


