| Technical Data | |
| Base | Polymer modified pozzolanic cementitious formula. Contains no asbestos or gypsum. |
| Color | Tan |
| Mixing Ratio | 3 1/2 parts powder to 1 part water. |
| Working Time | 20 to 35 minutes at 70°F. Will vary with conditions. |
| Coverage | Per 10 lbs. of powder: Skimming over concrete or plywood: 100 - 150 square feet. |
| Packaging | 4-10lb. bags per case |
| Shelf Life | 6 months if stored in a cool, dry area. Keep bags tightly sealed. |
Poz-Patch 3 is a polymer modified pozzolanic formula that requires only the addition of clean water to produce a fast-setting, skim coating patch. Poz-Patch 3 is ideal as a skim coat and for filling substrate imperfections, cracks and seams. It can also be sloped to accommodate transition areas.
Limitations
Poz-Patch 3 is not self-leveling.
Surface Preparation
Substrates must be sound, solid, clean and free from dust, oil, grease, paint, wax sealers or any deleterious substances that may prevent bonding. Poz-Patch 3 can be installed over old adhesive residues that are thin and well bonded. Adhesive residue must not be affected by water or the adhesive used for the next floor covering. If both adhesives are suitable, wet-scrape the old adhesive to a thin, well-bonded residue, using the recommendations of the Resilient Floor Covering Institute. Apply Poz-Patch 3 at temperatures between 50°F and 95°F. Do not use over unstable material such as gypsum or particle board.Poz-Patch 3 does not require priming prior to installation.
Mixing & Application
Place a small amount ofPoz-Patch 3 in a clean mixing container. While mixing, add water until a trowelable, lump-free consistency is achieved. Recommended mixing ratio is 3 1/2 parts powder to 1 part water by volume. DO NOT OVER-WATER! Mix only the amount that can be used in 20 minutes. Do not retemper. Never mix with cements or other additives. Pour and trowel the patch using a steel trowel. Apply sufficient pressure to fill all defects of the subfloor. Poz-Patch 3 may be applied from featheredge to 1/8”.
This cementitious product can be irritating to eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact with skin, flush thoroughly with water. In case of contact with eyes, flush with water and get prompt medical attention.
Store in a cool, dry area. Keep bags tightly sealed when not in use. Manufacturer's warranty is limited to the replacement of defective material. Fritz Industries, Inc. must be notified of underlayment failure within 6 months after installation.
Documentation
 |
POZ Patch-3 Material Safety Data Sheet, 79.41 kB |
|
POZ Patch-3 Product Information Sheet, 73.64 kB |
Stock Information
| Product # | Product | Bag Size | Pallet Size |
| 369-98041 | POZ Patch-3, skim-coat patch | 10 lbs. | 168 bags |
| 369-98042 | POZ Patch-3, skim-coat patch | 40 lbs. | 36 pails |
 |
|
|
|
Some documents require Adobe Reader If you've not yet installed Adobe Reader on your computer, click here to download and install it.
